Suscribir

Iniciar sesión

Motor paso a paso NEMA 8 - 180g/cm Pololu 1204

Motor paso a paso NEMA 8 - 180g/cm Pololu 1204

Motor paso a paso Bipolar 20x30mm - 200 pasos, 3.9V, 600mA

NEMA 8 Stepper Motor

This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 7Ncm(9.91oz.in).

STEPPERONLINE NEMA 8 Bipolar Smallest Stepper Motor 1.6Ncm/2.3oz.in 1.8deg 28mm 0.2A 4 Leads

Double Shaft NEMA-17 bipolar 34mm 4-wire 1.8° step angle(200 steps/rev) Rated current 0.4A & resistance 30ohms 26Ncm(36.8oz.in) holding torque This is bipolar Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). A rear shaft can mount encoder or equals.

STEPPERONLINE Dual Shaft NEMA 17 Stepper Motor 1.8deg 26ncm/37oz.in 12V 0.4A 42x42x34mm 4-Wire

Short Height. 16Ncm(22.6oz.in) holding torque. NEMA 17 bipolar 1.65x1.65x0.79 4-wire. 1.8 deg. step angle(200 steps/rev). Rated current 1.0A & resistance 3.5ohms. Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

STEPPERONLINE Short Body NEMA 17 Bipolar Stepper Motor 1A 18.4oz.in/13Ncm DIY

Pololu - Stepper Motors

Nema 8 Stepper Motor 20mm, Nema8 Stepper Motor

Pololu - Stepper Motors

Motor PAP (Paso a Paso) Nema 17 1.22kg 17HS2408

FEATURES: 2 phase, 1.8 degree step angle, 0.68Nm(100.6oz-in) holding torque, 1.8-2.0A rated current, 4-wire (30cm) SPECIFICATION: Phase resistance

Nema 17 Stepper Motor Bipolar Step Motor 1.8 Deg 68Ncm with Built-in 30cm Cable for 3D Printer CNC Router